THREE-IN-ONE UPGRADE BUS STAIR CONTROL SYSTEM (Model 3001)
$180.00
Scope of Use:
-
Indoor stairs
-
Steps
-
Handrails
-
Aisles
Product Parameters:
-
Input Voltage: AC 220V
-
Output Voltage: 24V 16.6A
-
Step Power Output:
➔ Single channel 24V = 30W -
Chasing Light (Flow) Capacity:
➔ Controls up to 1200 pixels -
Sensor Heads: 2 units
-
Product Size:
➔ 221mm × 60mm × 27mm
-
Product Features:
-
Bus Wiring:
➔ Only one main bus line required; branch lines plug directly into stair lights — simple and efficient wiring. -
Built-in Power Supply:
➔ Transformer and controller are integrated.
➔ Direct connection to input voltage (AC220V) — easier and faster installation. -
Stepping Function:
➔ Lights illuminate one step at a time when people are detected. -
Chasing Light (Marquee) Function:
➔ Light bar creates a flowing light effect when sensing movement. -
Bluetooth Control:
➔ Settings adjustable via mobile phone using a WeChat mini-program. -
Support Capabilities:
➔ Stair lights: Single-channel 30W
➔ 1-channel chasing light (marquee)
➔ Compatible with 24V-LED
You must be logged in to post a review.
Free Shipping
Carrier: EMS
Cost: Free
Process Time 2-10 Working days
Shipping Time 2-5 weeks
Related products
Intelligent Motion Sensor LED Stair Light Kit(model GY220B)
Stair Light Control System
What's in the box 1pc LED Power-free Controller 1 roll 10 meters long Water Flowing effect Strip Light 2pcs PIR Sensor 2pc Sensor Extension CableNew Products: Intelligent stair light controller with motion sensor Design: 2 in 1 ( 24V 400W Power Supply + Stair Light Controller integration), installation is more convenient. Input Voltage: 175V-265V AC ( 220V,230V is working, 110V is not working) Output: DC 24V Max Power: 400W Product size: 223*60*27mm Sensor A: Used for Upstairs Sensor B: Used for Downstairs 2pcs Extension Cable Length: 5Meters ( Sensor to controller)
Function:
1. Timer Delay OFF (2s,10s,20s,40s,60s,80s Auto-delay-off adjustable) 2. Brightness & Speed is adjustable 3. Pixel Number is adjustable, Max. up to 1024 Pixels. Strip Length Max. up to 42 Meters.
Compatible SPI Led Strip Light:
Working Voltage: 24V LED Type: COB Chips Qty: 360 Chips/meter Length: 2X5M/5M/10M/15M/2X10M Color: Warm White 3000K, Natural White 4000K, Cool White 6000K PCB Width: 10mm Strip Wire: Red Wire--- Postive +24V Green Wire ---- GND signal wire White Wire ---- Negative -24V
NOTE:
You must read the User Manual for Settings when testing. IF not, Only half led strip working. THAT IS NOT Quality Problem!!! Step A: Set Pixel Number, make sure all diodes are working for the whole LED strip. Step B: Set Strp Order by Pressing RGB/RBG button
FULL BRIGHT CLASSISC STAIR CONTROLLER: 2 Line Version (model QL1)
Features:
Step Lighting:
Upon motion detection, all stair steps illuminate simultaneously, providing clear visibility and enhancing nighttime safety.
Simplified Wiring:
Say goodbye to complicated installations. The system requires only a single 2-wire main line, making setup easier and more efficient.
Light Chasing Function:
With motion sensing, the side strip lights create a flowing effect—lighting up step-by-step in a running and chasing pattern, delivering a visually captivating and modern touch to your stairs.
TWO IN ONE ENHANCED ANTI SHORT CIRCUIT STAIRS LIGHT CONTROLLER(model s450)
Stair Light Control System
Scope of Application:
Designed for indoor staircases, enhancing safety and ambiance with intelligent lighting control.
Features:
-
Step Lighting: Automatically illuminates each step in sequence as a person uses the stairs, providing a visually appealing and safe experience.
-
Motion Sensing: Detects movement and activates the lights step by step.
Short Circuit Protection Design:
Built with a durable protection mechanism that safeguards the controller, preventing damage from short circuits at the ports.
Adjustment Functions:
-
Lighting Pixels: Allows customization of the number of lights or steps to be activated.
-
Lighting Speed: Enables users to set the speed of light transitions according to their preference.
TWO-IN-ONE STAIR LIGHT CONTROL SYSTEM (Model 2001)
Scope of Use:
-
Indoor stairs
-
Steps
-
Handrails
-
Aisles
⚙️ Product Parameters:
-
Power Voltage: DC 12V / 24V
-
Controllable Steps: 32 channels
-
Step Power Output:
➔ 12V = 24W per step
➔ 24V = 30W per step -
Chasing Light (Flow) Capacity:
➔ Controls up to 1200 pixels -
Sensor Heads: 2 pieces
-
Product Size:
➔ 114mm × 96mm × 26mm
INTELLIGENT RUNNING LIGHT CONTROL SYSTEM: ND-PM-1T6
- Light Strip Options: Supports Monochrome LED, Magic RGB, Two-Color LED, and multiple running light effects for dynamic lighting.
- Adjustment Features: Allows customization of length, chasing speed, brightness, and dual-color settings for the chasing strip light.
- Light Tracing Function: Senses motion and activates the side strip light to follow in a flowing water-like pattern, with running and chasing light effects.
INTELLIGENT STAIRS LIGHT CONTROL SYSTEM: 2 IN 1 – 5 Wires mainline version(model GY220)
Stair Light Control System
Scope of Application
Ideal for indoor use on stairs, handrails, and passageways, providing smart, responsive, and visually appealing lighting.
Features
Simplified Wiring
Designed to reduce installation complexity — only one 3-wire mainline is required, allowing easy connection of stair step strip lights without the need for intricate cabling.
Built-in Power Supply
The controller and power supply are integrated into a single unit. It connects directly to 220V, ensuring a faster and cleaner installation process.
Advanced Light Chasing Function
This system allows customization of lighting delay, timing, and brightness levels. Paired with a dual-color light strip, it offers the ability to switch between different color temperatures, enhancing both functionality and ambiance.
3 COLOR-TEMP FULL BRIGHT STAIR LIGHT CONTROLLER(model QL2)
Stair Light Control System
⚠️ WARNING: Do not use single-color strip lights. Doing so may cause the controller to burn out!
Scope of Application:
Ideal for indoor use on stairs, handrails, passageways, and similar areas requiring automatic lighting.
Features:
Simplified Wiring:
The system eliminates the need for complicated wiring. Only one 3-wire main line is needed to connect all stair step strip lights. Alternatively, some configurations may use a 2-wire main line for simpler setups.
Short Circuit Protection Design:
Built-in protection ensures the controller remains stable and durable, safeguarding the system from port short circuits and extending product life.
Adjustment Function:
Customize your lighting with ease — adjust the lighting delay time and brightness. When using a two-color light strip, you can also switch between color temperatures, allowing for flexible ambiance control.
TWO WIRE BLUETOOTH UPGRADED VERSION OF STAIR CONTROLLER(model ZK-10)
2 Wire Stair Lamp Controller
Scope of Application: Ideal for indoor staircases, offering simplified installation and intelligent lighting control.
Features: Simplified Wiring: No more complex wiring systems—only a single 2-wire main line is needed. All stair step strip lights can be conveniently connected to this main line, streamlining installation and reducing clutter. Light Chasing Function: Equipped with motion sensing, the system activates a flowing light effect. As a person moves, the light strip responds with a smooth, running and chasing illumination, mimicking the flow of water and enhancing the stairway’s ambiance.
Reviews
There are no reviews yet.